Kaliba Sp z o.o. was founded in 1998 in The Economic Zone in Kamienna Góra. Our company is situated in very picturesque place far from city noise, but close to main roads and highways. In our comapny, there are hygienic-sanitary standards.
The main manufactured products are high quality thermoforming films and multilayer casings. We offer the wide range of colors and size of our products.
We are constantly working to improve the quality of both our products and customer service.
We develop through investing in machinery, employee training & development and market analysis. The customer satisfaction is the most important for us.
Multilayer film PAPE
HIGH BARRIER EVOH
THICKNESS RANGE FROM 65 TO 280 µ
EXCELLENT GLOSS AND CRYSTAL CLARITY
LOW TEMPERATURE SEALABILITY
EXCELLENT THERMOFORMING PROPERTIES
Characteristics of films
- oxygen and steam barrier, EVOH layer for product extra shelf life
- thickness range from 65 to 280 µ
- width range : according to individual customer needs
The advantages of film
- excellent thermoforming properties
- high efficiency – application of a thinner film while maintaining the same thermoforming parameters
- a wide range of processing temperatures
- high transparency
- high gloss
- excellent puncture resistance
- high barrier
excellent thermoforming properties, very high transparency
A GUARANTEE OF A GOOD PACKAGING
Delivering both top and bottom film of the packages, we provide attractive packaging , repeatability, good manufacture parameters and packaging safety.
Due to innovation technology we created a unbeatable product on a food packaging market.
The innovation of this technology during the production process consists in using water instead of air. This allows a much faster and more efficient cooling so that the film achieves excellent mechanical properties, high transparency and gloss.
During the production of our film no harmful substances polluting air and water are released. In addition, the new technology allows you to reduce the technology waste by 50%, to the necessary minimum.
VERY GOOD SHAPE REPRODUCTION
HIGH OXYGEN AND STEAM BARRIER
VERY GOOD MECHANICAL PROPERTIES
OFFERED IN CALIBRES FROM Ø 32 TO Ø 130
SZEROKA GAMA KOLORÓW
Osłonki oferujemy w opcjach:
- typu ball – mocno przepełnialne (np. na szynki na których nakładane są siatki)
- termokurczliwe lub niskotermokurczliwe
- do form
Specjalizujemy się w produkcji wysokobarierowych osłonek poliamidowych w kalibrze od ∅ 35 do ∅ 130, w pełnej gamie kolorystycznej – 5-warstwowe.
Nasze osłonki odznaczają się wysoką barierowością; są termokurczliwe, poliamidowo – polietylenowe oraz orientowane.
The production of PAPE flexible film in Kalibra Sp. z o.o. utilizes blow molding technology, with the innovative cooling system of the extruded sleeve. Rapid cooling of the blown film sleeve is achieved by moving it through a water-bath tank at a controlled, low temperature. During fast cooling, the amorphous structure freezes. The optical and mechanical properties of the film, its transparency, gloss and thermoformability, depend on the proportion of the crystalline phase. The smaller the proportion of the crystalline phase, compared to the amorphous one, the better. A similar phenomenon occurs in the production of glass.
BASF, one of the main producers of polyamide, with the trade name Ultramid. , has issued a publication which is worth mentioning at this point. It presents the relationship between the crystallinity and thermoformability of a 50 μ-PA film from Ultramid; crystallinity being expressed as a percentage of haze, and thermoformability, defined as the its thinnest points of the film, in formed shapes. At crystallinity of 38% and 2.8% haze, the measured thickness of the film at its thinnest points was 12μ. With a crystallinity of 20% and 0.4% haze, the measured film thickness at its thinnest points, reaching 18μ was vividly higher.
High transparency of the film produced by Kalibra Sp. z o.o., with the coefficient of light transmission well above 90%, indicates a high proportion of the amorphous phase, and hence confirms the extremely good thermoformability of the multilayer films produced by Kalibra. Such a high proportion of the amorphous phase is not achievable with other technologies of co-extruded, PA based films production.
Kalibra produces multilayer co-extruded films within the thickness range of 65 to 280μ. These are 6-layer-films with the PA / adh * / PA / adh / PE / PE structure, where adh * is a binding polymer. The distribution of the PA layer into two independent ones is an additional advantage which ensures achieving higher strength of the formed packaging when compared to a single layer of the same thickness. This feature is critical for packaging corner and thus enables to increase the forming depth.
The range of multilayer films produced by Kalibra includes EVOH based solutions, with increased oxygen barrier.
And the types with a weldable PP layer, will additionally enable pasteurization of products packed in such films.
The particularly high puncture resistance of the co-extruded multilayer films, produced by Kalibra, is another strong advantage. A good example here will be packaging of sharp products, such as chicken wings, which are now packed by one of Kalibra customers in a 10% thinner film as compared to previously used, with no negative effect on the packaging process and the quality of the packaging produced.
1. Goetz W. Crystallinity of Polyamide films, BASF AG presentation, Duisburg, April, 2005.
Kalibra Sp. z o.o.
street Jedwabna 15, 58-400 Kamienna Góra, Poland
ph.: +48 75 744 90 40 fax: +48 75 744 90 50
eksport: Monika Adamkowska
tel.: +48 603 382 128, e – mail: email@example.com
NUMER BDO 000014736